Your chimney–and the flue that lines it–may add architectural interest to
your home, but their real function is to carry dangerous fireplace, wood stove or furnace*
gases and smoke safely out of your home. A chimney helps your household air stay
breathable…just as your windows and your bathroom, attic and kitchen vents do. Unlike
those other exhaust points in your home, however, fireplace and wood stove chimneys need
a special kind of care. As you snuggle in front of a cozy fire or bask in the warmth of your
wood stove, you are taking part in a ritual of comfort and enjoyment handed down though
the centuries. The last thing you are likely to be thinking about is the condition of your
chimney. However, if you don’t give some thought to it before you light those winter fires,
your enjoyment may be very short-lived. Why? Dirty chimneys can be a fire hazard. Chimney
fires can damage structures, destroy homes and injure or kill people.

No One Welcomes a Chimney Fire
A chimney fire in action can be impressive. It has been described variously as creating: . a
loud cracking and popping noise, a lot of dense smoke, and  an intense, hot smell.  Chimney
fires can burn explosively – noisy and dramatic enough to be detected by neighbors or
people passing by. Flames or dense smoke may shoot from the top of the chimney.
Homeowners report being startled by a low rumbling sound that reminds them of a freight
train or a low flying airplane. However, those are only the chimney fires you know about.
Slow-burning chimney fires don’t get enough air or have fuel to be dramatic or visible. But,
the temperatures they reach are very high and can cause as much damage to the chimney
structure – and nearby combustible parts of the house – as their more spectacular cousins.
With proper chimney system care, chimney fires are entirely preventable.

Creosote & Chimney Fires: What You Must Know
Fireplaces and wood stoves are designed to safely contain wood-fuel fires, while providing
heat for a home. The chimneys that serve them have the job of expelling the byproducts of
combustion – the substances produced when wood burns. These include smoke, water
vapor, gases, unburned wood particles, hydrocarbon volatile, tar fog and assorted minerals.
As these substances exit the fireplace or wood stove, and flow up into the relatively cooler
chimney, condensation occurs. The resulting residue that sticks to the inner walls of the
chimney is called creosote. Creosote is black or brown in appearance. It can be crusty and
flaky…tar-like, drippy and sticky…or shiny and hardened. Often, all forms will occur in one
chimney system. Whatever form it takes, creosote is highly combustible. If it builds up in
sufficient quantities – and catches fire inside the chimney flue instead of the firebox of the
fireplace or wood stove – the result will be a chimney fire. Although any amount of creosote
can burn, sweeps are concerned when creosote builds up in sufficient quantities to sustain a
long, hot, destructive chimney fire. Certain conditions encourage the buildup of creosote.
Simply put, restricted air supply, unseasoned wood and cooler-than normal chimney
temperatures are all factors that can accelerate the buildup of creosote on chimney flue
walls. Air supplies on fireplaces may be restricted by closed glass doors or by failure to open
the damper wide enough to move heated smoke up the chimney rapidly (the longer the
smoke’s "residence time" in the flue, the more likely is it that creosote will form). A wood
stove’s air supply can be limited by closing down the stove damper or air inlets too soon and
too much, and by improperly using the stovepipe damper to restrict air movement. Burning
unseasoned wood – because so much energy is used initially just to drive off the water
trapped in the cells of the logs– keeps the resulting smoke cooler, as it moves through the
system, than if dried seasoned wood is used. In the case of wood stoves, fully packed loads
of wood (that give large cool fires and 8 or 10 hour burn times) also contribute to creosote
buildup. Cool flue temperatures speed creosote production, too. Condensation of the
unburned byproducts of combustion occurs more rapidly in an exterior chimney, for example,
than in a chimney that runs through the center of a house and exposes only the upper
reaches of the flue to the elements.

How Chimney Fires Hurt Chimneys
Masonry Chimneys. When chimney fires occur in masonry chimneys – whether the flues are
an older, unlined type or are tile lined to meet current safety codes – the high temperatures
at which they burn (around 2000°F) can "melt mortar, crack tiles, cause liners to collapse
and damage the outer masonry material". Most often, tiles crack and mortar is displaced,
which provides a pathway for flames to reach the combustible wood frame of the house. One
chimney fire may not harm a home. A second can burn it down. Pre-fabricated, factory-built,
metal chimneys. To be installed in most jurisdictions in the United States, factory built, metal
chimneys that are designed to vent wood burning stoves or pre-fabricated metal fireplaces
must pass special tests determined by Underwriter’s Laboratories (UL). Most tests require
the chimney to withstand flue temperatures up to 2100°F – without sustaining damage.
Under chimney fire conditions, damage to these systems still may occur. When pre-
fabricated, factory-built metal chimneys are damaged by a chimney fire, they should no
longer be used and must be replaced.

Special Effects on Wood Stoves
Wood stoves are made to contain hot fires. The connector pipes that run from the stove to
the chimney are another matter. They cannot withstand the high temperatures produced
during a chimney fire and can warp, buckle and even separate from the vibrations created
by air turbulence during a fire. If damaged by a chimney fire, they must be replaced. Nine
Signs that You’ve Had a Chimney Fire Since chimney fires can occur without anyone being
aware of them…and since damage from such fires can endanger a home and its occupants,
how do you tell if you’ve experienced a chimney fire? Here are the signs a professional
chimney sweep looks for: . "puffy" creosote, with rainbow colored streaks, that has expanded
beyond creosote’s normal form. . Warped metal of the damper, metal smoke chamber
connector pipe or factory-built metal chimney . Cracked or collapsed flue tiles, or tiles with
large chunks missing . Discolored and/or distorted rain cap . Heat-damaged TV antenna
attached to the chimney . Creosote flakes and pieces found on the roof or ground . Roofing
material damaged from hot creosote . Cracks in exterior masonry . Evidence of smoke
escaping through mortar joints of masonry or tile liners If you think a chimney fire has
occurred, call a Chimney Sweep for a professional evaluation. If your suspicions are
confirmed, a certified sweep will be able to make recommendations about how to bring the
system back into compliance with safety standards. Depending on the situation, you might
need a few flue tiles replaced, a relining system installed or an entire chimney rebuilt. Each
situation is unique and will dictate its own solution.

Proper Maintenance
Clean chimneys don’t catch fire. Make sure a Chimney Sweep inspects your solid fuel
venting system annually, and cleans and repairs it whenever needed. Your sweep may have
other maintenance recommendations depending on how you use your fireplace or stove

Ways to Keep the Fire You
Want…from Starting One You Don’t!
Chimney fires don’t have to happen. Here are some ways to avoid them. . Use seasoned
woods only (dryness is more important than hard wood versus soft wood considerations .
Build smaller, hotter fires that burn more completely and produce less smoke . Never burn
cardboard boxes, wrapping paper, trash or Christmas trees; these can spark a chimney fire .
Install stovepipe thermometers to help monitor flue temperatures where wood stoves are in
use, so you can adjust burning practices as needed . Inspect and clean catalytic combustors
on a regular basis, where applicable

What to Do if You Have a Chimney Fire
If you realize a chimney fire is occurring, follow these steps:
- Get everyone out of the house, including yourself
- Call the fire department. If you can do so without risk to yourself, these additional steps
may help save your home. Remember, however, that homes are replaceable, lives are not:
- Put a chimney fire extinguisher into the fireplace or wood stove . Close the glass doors on
the fireplace . Close the inlets on the wood stove . Use a garden hose to spray down the roof
(not the chimney) so the fire won’t spread to the rest of the structure
                                                 
The Chimney Man
(Our Service Will Sweep You Away!)
(330) 429-5147
                            The Facts About Chimney Fires  
                         
            "Chimneys really decorate the roofline of a home…
               and they're maintenance–free. Right?"

                                              WRONG!